IT Enterprise - шаблон joomla Окна

Temp Coat 101 500x650

TEMP-COAT® 101 is a general purpose insulation which comes in liquid form. This industrial designed liquid acrylic latex ceramic insulation performs extremely well on piping, air and heat duct work, exposed water pipes, tanks, oxygen lines, steam lines, refrigeration equipment, cryogenics, and condensation control. This amazing product has many other uses. It physically adheres to the surfaces it insulates between -80ºF (-66.2 C) and +350º F (176.7 C). The product will work on surfaces as hot as 500º F (260 C) using the special instructions offered by TEMP-COAT® Brand Products, LLC.

Q2 800x800 300x390Q2 surface conditioner and primer converts rust into a protective polymeric coating. This is a necessary product to be used anywhere rust has appeared or is a problem.

Q2 converts iron oxide to a black ferro-organic coating that incorporates the rust as part of the coating. Apply with brush, roller or spray. For extremely bad rust or rust in cracks or crevasse, two coats may be needed to assure the complete conversion.

A top coat will be needed where surface is dry and tack free.

Apply an appropriate primer if your top coat is a latex based product to prevent bleed through.

Q2 is not corrosive to human tissue and is very safe to use. Remove all rust scale or heavy rust before applications.

Silent Running 300x390

Silent Running is a high performance coating specifically designed to eliminate unwanted sound and vibration in the marine environment. Silent Running works by converting noise energy and vibrations into a low grade heat, which is then dissipated throughout the applied surface. Silent Running is Coast Guard approved.

General Properties: Silent Running is water-based, non-toxic and VOC free. There are no harsh smells or vapors. Silent Running cleans up with water before it cures.


FG 140 300x390FG-140 is a fire extinguishing agent for use in pump trucks and spray applications.

Thickens water and increases the efficiency of water therefore when it is applied in the face of fire, it clings to the surface being sprayed and does not allow oxygen to feed the fire.

This product is designed to reduce the effects of fire in temporary use.

The product can be applied to any surface when fire is expected.

Such instances of approaching Forest Fires would allow FG-140 to be applied to a structure up to 72 hours in advance.

The thick, viscous material coats the outside of the structure and significantly reduces the chance of it catching on fire.

Fyre Shield 300x390Fyre Shield (FB-520) PYRO-TUMID COATING can be used on all wood based building materials, roof decking and trusses, floor joists, sub-flooring, dry wall, steel structures, I-Beams, columns, etc. Anywhere fire proofing and Thermal protection is needed. Has passed ASTM & 119 fire test, performed by 3M Certified Labs.

The right way to protect your property against fire. FB-520 is considered a Pyro-Tumid product.

When the surface is impinged by fire or high heat conditions, the surface (product) is converted into semi-hard blisters to repel the flame and reduce the temperature at the surface being protected. FB-520 is considered a sacrificial coating and must be replaced if a fire impinges the coating.

Light-weight, white in color, fast drying, easy to apply with brush, roller or airless spray.

Fire Loc 1 300x390Fire Loc is a ready to use clay based high temperature industrial insulation and filler for temperatures up to + 2000 F.

Fire-Loc must be covered with a top coat and protected from dampness and moisture.

This is usually protected with a fiberglass cloth coated with TEMP-COAT.

This is a refractory type product that can withstand very high temperatures once dry.

Fire-Loc is used in conjunction with repairs to high heat process and steam lines in industry.

When conventional insulation has failed, Fire-Loc can safely take its place following the manufacturers written instructions.

The use of Fire-Loc has been approved for several industrial repairs that have been viewed by the EPA and the DEQ.

Please contact us for more information.

TEMP-COAT® в России и СНГ

Полный перечнь продукции TEMP-COAT® на русском языке представлен на официальном сайте TEMP-COAT® в России и странах СНГ.

Ksinergy WebStudio

Ksinergy LogoСайт создан Ksinergy WebStudio
Разработка, создание, сопровождение, поисковая оптимизация (SEO), продвижение, информационная безопасность и защита вёбсайтов.